Sanyo PLC-XE34 Video Input, Input Source Selection Video, S-video, Direct Operation, Input Menu

Video Input

Input Source Selection (Video, S-video)

Direct Operation

Choose Video or S-videoby pressing the VIDEO or the S- VIDEO button on the remote control.

Before using these buttons, correct input source should be selected through menu operation as described below.

Remote Control

VIDEO button

Video

S-VIDEO button S-video

		Menu Operation
1	Press the MENU button to display the On-Screen
	Menu. Use the Point ▲▼ buttons to select Input and
	then press the Point ► or the SELECT button.
2	Use the Point ▲▼buttons to select Video and then
	press the SELECT button.
		When video input signal is connected to the
Video
		VIDEO jack, select Video.

Use the Point ▲▼ buttons to select Computer 1. And then press the Point ► button to access the submenu items. Use the Point ▲▼ buttons to select the S-videoand then press the SELECT button.

S-videoWhen the input source is coming from video equipment connected to the COMPUTER IN 1/S-VIDEO IN/COMPONENT IN terminal with a S-video-VGA cable, select S-VIDEO.

✔Note:

When the Input Search function is set to On1 or On2 in the Auto setup function, the input signal will be searched automatically (p.44).

Input Menu

Auto

Auto

Computer 1

36