Sanyo PLC-XE34 Video Input, Direct Operation, Menu Operation, Input Menu, Component, RGB Scart

Video Input

Input Source Selection (Component, RGB Scart 21-pin)

Direct Operation

Choose Computer 1(Component) or Computer 1(Scart) by pressing the COMPONENT or the COMPUTER 1 button on the remote control.

Before using these buttons, correct input source should be selected through Menu operation as described below.

Remote Control

COMPUTER 1 button

Computer 1(RGB)

Computer 1(Scart)

COMPONENT button

Computer 1(Component)

	Menu Operation	Input Menu
1	Press the MENU button to display the On-Screen
	Menu. Use the Point ▲▼ buttons to select Input and
	then press the Point ► or the SELECT button.
2	Use the Point ▲▼ buttons to select Computer 1 and
	then press the Point ► button.
3	Use the Point ▲▼ buttons to select Component or
	RGB(Scart) and then press the SELECT button.

Component

When the input source is coming from video equipment connected to the COMPUTER IN 1/S-VIDEO IN/COMPONENT IN terminal with a Component-VGA Cable, select Component.

RGB (Scart)

When the input source is coming from video equipment connected to the COMPUTER IN 1/S-VIDEO IN/COMPONENT IN terminal with a Scart-VGA Cable, select RGB (Scart).

S-video

✔Note:

When the Input Search function is set to On1 or On2, the input signal will be searched automatically (p.44).

37