Sanyo PLC-XE34 owner manual Setting, Key lock PIN code lock, Security Key lock and PIN code lock

Models: PLC-XE34

1 78
Download 78 pages 40.99 Kb
Page 54
Image 54
Security (Key lock and PIN code lock)

Setting

Security (Key lock and PIN code lock)

This function allows you to use the Key lock and PIN code lock function to set the security for the projector operation.

Key lock

This function locks the top control and remote control buttons to prevent operation by unauthorized persons.

Select Key lock and then press the SELECT button, and select the desired item by pressing the Point ▲▼ buttons.

...... Unlocked.

...... Lock the operation of the top control. To

unlock, use the remote control.

...... Lock the operation of the remote control.

To unlock, use the top control.

If the top control accidentally becomes locked and you do not have the remote control nearby or there is something wrong with your remote control, contact the dealer where you purchased the projector or the service center.

PIN code lock

This function prevents the projector from being operated by unauthorized persons and provides the following setting options for security.

Off............ Unlocked.

On1.......... Enter the PIN code every time turning on

the projector.

On2.......... Enter the PIN code to operate the projector

once the power cord is disconnected; as long as the AC power cord is connected, the projector can be operated without a PIN code.

Whenever you change the PIN code lock setting or the PIN code (the four-digit number), you are required to enter the PIN code. The “1234” is set as the initial PIN code at the factory.

If you want to change the PIN code lock setting, press the SELECT button and the PIN code dialog box appears.

When the projector is locked with the PIN code, the Security icon appears on the guide.

Key lock

PIN code lock

54

Page 54
Image 54
Sanyo PLC-XE34 owner manual Setting, Key lock PIN code lock, Security Key lock and PIN code lock