PREPARATION

PICTURE LEVEL AND TILT ADJUSTMENT

Picture tilt and projection angle can be adjusted with handles on both sides of a projector. Projection angle can be adjusted to 5.7 degrees upper way.

1

Press knob on handle. Handle pop out.

 

2

Turn handles (right and left) until picture is projected on

 

 

proper position. Adjust height of rear adjustable feet by

 

rotating them until projector properly stabled on table.

3

Press knob and retract handle.

 

REAR ADJUSTABLE

FEET. (Refer to P7).

LEVEL AND TILT

ADJUST HANDLE

KNOB

ADJUSTABLE

FEET

Height of front feet can be adjusted by turning handles.

INSTALLING PROJECTOR IN PROPER POSITION

Install the projector properly. Improper installation may reduce the lamp lifetime and cause a fire hazard.

10˚

Do not tilt the projector more than 10 degrees above and below.

10˚

Do not point the projector up to project an image.

NO UPWARD

Do not point the projector down to project an image.

NO DOWNWARD

Do not put the projector on either side to project an image.

NO SIDEWAYS

10