LENS REPLACEMENT AND INSTALLATION PROCEDURE

NOTE : The installation procedure and needed parts for lens installation depend on the type of the Projection Lens. Check the Model No. of the Projection Lens and be sure to install or replace the lens following procedure below.

1

Remove Lens Cover. Remove 2 Screws A. Push

part B and pull Upper Lens Cover up.

(See Fig. 1.)

UPPER LENS

COVER

B

2

Remove 4 Screws C. Pull Lower Lens Cover

toward front and remove. (See Fig. 2.)

A

Fig-1

C

LOWER LENS COVER

E

C Fig-2

D

3

Remove 2 Screws D and Cover Plate on the

back of Upper Lens Cover. (See Fig. 3.)

UPPER LENS

COVER

COVER PLATE

Fig-3

- 2 -