Sanyo PLC-XF46N/E APPENDIX, INDICATORS AND PROJECTOR CONDITION

APPENDIX

INDICATORS AND PROJECTOR CONDITION

Check the Indicators for projector condition.

	Indicators				Projector Condition
LAMP	WARNING		READY	LAMP
REPLACE	TEMP.
			green	red
yellow		red
					The projector is OFF. (The MAIN switch OFF position or the
					AC Power Cord is unplugged.)
✽					The projector is READY to be turned on with the POWER ON-
					OFF button.
✽					The projector is operating normally.
					The temperature inside the projector is abnormally high. The
					projector cannot be turned on. When the projector is cooled
✽					down enough and the temperature returns to normal, the
					READY indicator lights green and the projector can be turned
					on. (The WARNING TEMP. indicator keeps flashing.) Check
					and clean the Air Filter.
					The projector is cooled down enough and the temperature
✽					returns to normal. When turning on the projector, the WARNING
					TEMP. indicator stops flashing. Check and clean the Air Filter.

✽			The projector is being cooled down. It cannot be turned on until
			the READY indicator lights green.
			The projector detects an abnormal condition and cannot be
			turned on. Unplug the AC Power Cord and plug it again to turn
✽			on the projector. If the projector is turned off again, disconnect
			the AC Power Cord and contact the dealer or the service center
			for service and checkup. Do not leave the projector on. It may
			cause electric shock or a fire hazard.
✽			The projector is in the Power management mode.
• • • on : red	• • • flashing : red	• • • on : green		• • • flashing : green	• • • dim	• • • off

50