Sanyo PLC-XF46N/E KEYSTONE ADJUSTMENT, ZOOM ADJUSTMENT, FOCUS ADJUSTMENT, LENS SHIFT ADJUSTMENT, Lens shift

KEYSTONE ADJUSTMENT

If a projected picture has keystone distortion, correct image with KEYSTONE adjustment.

1 Press KEYSTONE button on Remote Control Unit or select Keystone on SETTING menu. (Refer to page 39.) Keystone dialog box appears.

2 Correct keystone distortion by pressing POINT UP/DOWN button(s). Press POINT UP button to reduce upper part of image, and press POINT DOWN button to reduce lower part.

BASIC OPERATION

	ADJUSTING SCREEN
	ZOOM ADJUSTMENT
1	Press ZOOM ▲/▼ button on Side Control or on Remote Control
	Unit. Message “Zoom” is displayed.
2	Press ZOOM ▲ button to make image larger, and press ZOOM
	▼ button to make image smaller.		Zoom
	Message disappears after 4 seconds.
	FOCUS ADJUSTMENT
1	Press FOCUS ▲/▼ button on Side Control or on Remote Control
	Unit. Message “Focus” is displayed.
2	Adjust focus of image by pressing FOCUS ▲/▼ button(s) .
			Focus
	Message disappears after 4 seconds.
	LENS SHIFT ADJUSTMENT
1	Press the LENS SHIFT button on Side Control or on the Remote
	Control Unit. Message “Lens shift” is displayed.
2	Press POINT UP button to move image up, press POINT DOWN	Lens shift
	button to move image down, press POINT LEFT to move image
	left and press POINT RIGHT to move image right.
	Message disappears after 4 seconds.

Reduce upper width with POINT UP button.

Message disappears after 4 seconds.

Reduce lower width with POINT DOWN button.

24