PREPARATION

NAME OF EACH PART OF PROJECTOR

FRONT OF CABINET

INFRARED

REMOTE RECEIVER

PROJECTION LENS

LENS CAP

CAUTION

Do not turn on a projector with lens cap attached. High temperature from light beam may damage lens cap and result in fire hazard.

POWER CORD

CONNECTOR

MAIN ON / OFF

SWITCH

CARRYING HANDLE

LEVEL AND TILT ADJUST HANDLE

BACK OF CABINET

EXHAUST VENT

HOT AIR EXHAUSTED !

Air blown from exhaust vent is hot. When using or installing a projector, following precautions should be taken.

●Do not put a flammable object near this vent.

●Keep rear grills at least 3.3’ (1m) away from any object, especially heat-sensitive object.

●Do not touch this area, especially screws and metallic parts. This area will become hot while a projector is used.

This projector detects internal temperature and automatically controls operating power of Cooling Fans.

INFRARED

REMOTE RECEIVER

LAMP COVER

BOTTOM OF CABINET

 

AIR FILTER

AIR INTAKE VENTS

 

This projector is equipped with cooling

 

fans for protection from overheating.

 

Pay attention to following to ensure

ADJUSTABLE FEET

proper ventilation and avoid a possible

 

risk of fire and malfunction.

 

● Do not cover vent slots.

 

● Keep bottom clear of any objects.

 

Obstructions may block cooling air.

 

ADJUSTABLE FEET

7