Maintenance and Cleaning

Air Filter Replacement

Air filters prevent dust from accumulating on the surface of the optical elements inside the projector. Should the air filters become clogged with dust particles, it will reduce cooling fans’ effectiveness and may result in internal heat build up and adversely affect the life of the projector. Proper maintenance should be taken.

WARNING FILTER Indicator

This projector can monitor the filter condition. When the filter is clogged with dust and the performance is degraded, the WARNING FILTER indicator lights orange and let you know the filter replacement is required.

If the indicator is lighting orange, turn off the projector and replace the air filter immediately.

Using the projector with the WARNING FILTER indicator lighting may result in internal heat build up and cause damage to the optical elements inside the projector. The projector will shutdown automatically to protect itself when the projector's inside temperature is abnormally high.

1

Turn off the projector, and disconnect the AC power cord

 

from the AC outlet.

2

Pull down the tabs on both sides top of the filter cover and

 

open the projector cover.

3

Pull out the air filter from the projector.

4

Replace the new air filter and the filter cover properly onto

 

the projector.

5

Reset the Filter time. See “Filter” in the Special menu on

 

page 57.

CAUTION

Do not operate a projector with Air Filter removed. Dust may accumulate on LCD Panel and Mirror degrading picture quality.

Do not put small parts into Air Intake Vents. It may result in malfunction of a projector.

RECOMMENDATION

We recommend avoiding dusty/smoky environments when operating a projector. Usage in these environments may cause poor image quality.

When using under dusty or smoky conditions, dust may accumulate on liquid crystal panel, lens, or optical elements inside it. This condition may degrade quality of projected image.

When above symptoms are noticed, contact your authorized dealer or service station for proper cleaning.

TOP CONTROL

WARNING FILTER lights orange

Filter cover

Air filter

Note:

The projector cannot be operated with the air filter removed; it will shut down automatically if the air filter is removed while the projector is operating.

Used in a place where the air pressure is relatively low such as highlands, the WARNING FILTER indicator may light orange even the air filter is clean.

Maintenance & Cleaning

ORDER REPLACEMENT FILTER

When ordering the replacement air filter, give the following information to the dealer.

Model No. of your projector

:

PLC-XF60A / PLC-EF60A

Replacement Filter Part No.

:

610 315 1588

61

Page 61
Image 61
Sanyo PLC-EF60A, PLC-XF60A, Multimedia Projector owner manual Air Filter Replacement, Filter cover Air filter