Sanyo PLC-EF60A, PLC-XF60A, Multimedia Projector USB Series B, C Jack, Usb, Serial Port OUT

Preparation

q

w

u	y	t	r	e	✽
q INPUT 4 (Vacant for Optional Interface Board)		t USB (Series B)
		This port is used for the projector maintenance.

Preparation

Optional interface board can be installed into this slot. (p.21, 73)

wINPUT 5 (Vacant for Optional Interface Board)

Optional interface board can be installed into this slot. This input accepts digital signals only. (p.21, 73)

eR/C JACK

Connect the remote control to this jack with the wired remote cable (not supplied) to use the remote control as wired. (p.25)

rUSB

Connect a USB mouse (commercially available) to control On-Screen Menu. (p.25)

✽A built-in micro processor which controls this unit may occasionally malfunction and needs to be reset. This can be done by pressing the RESET

button with a pen, which will shut down and restart the unit. Do not use the RESET function excessively.

ySERIAL PORT OUT

This terminal outputs signal from SERIAL PORT IN. When controling more than two projectors from a computer, connect the other projector to this terminal with a serial cross cable (commercially available).

uSERIAL PORT IN

When controling the projector from a computer, connect the computer to this terminal with a serial cross cable (commercially available).

13