Maintenance and Cleaning
Lamp Replace Indicators
Indicators
READY | LAMP | LAMP 1/2 | Projector Condition | ||
REPLACE |
| ||||
Green | Red |
| |||
| Orange |
| |||
|
|
|
| ||
|
|
|
|
|
|
|
|
|
|
| The lamp cannot light up. (The projector is preparing for |
|
|
|
|
| projection lamp is being cooled down. The projector cannot be turned on |
|
|
|
|
| until cooling is completed.) |
|
|
|
|
|
|
|
|
| Slow |
| |
|
|
|
|
|
|
|
|
|
|
| The lamp cannot light up. (The lamp has been cooled down enough and the |
|
|
|
|
| projector is in |
|
|
|
|
| |
|
|
| Slow |
|
|
The lamp is not installed in the projector.
Fast
The lamp of which indicator is lighting has been used overtime. Replace the lamp and then reset the Lamp time. The indicator will turn off.
Both
Either lamp cover is not replaced or fit in.
Both of the indicators keeps blinking three times at regular intervals and the projector cannot be turned on.
Slow
Maintenance & Cleaning
✽When the LAMP 1 REPLACE indicator and the LAMP 2 REPLACE indicator light orange, replace the projection lamps with new ones promptly. And then reset the Lamp time after replacement of the lamps. See pages 57, 62, and 63.
67
