Basic Operation
Turning Off the Projector
1 | Press the |
or on the remote control, and “Power off?” appears | |
| on the screen. |
2 | Press the |
| or on the remote control again to turn off the |
| projector. The LAMP indicator lights bright and the |
| READY indicator turns off. After the projector is |
| turned off, the cooling fans operate. You cannot turn |
| on the projector during this cooling down period. |
3 | When the projector has cooled down enough, the |
READY indicator lights green and then you can turn | |
| on the projector. To turn off the MAIN ON/OFF |
| Switch, wait until the projector is completely cooled |
| down. |
4 | Unplug the AC power cord from the AC outlet. |
TO MAINTAIN THE LIFE OF THE LAMP, ONCE YOU
TURN THE PROJECTOR ON, WAIT AT LEAST FIVE
MINUTES BEFORE TURNING IT OFF.
DO NOT UNPLUG THE AC POWER CORD WHILE
COOLING FANS ARE RUNNING OR BEFORE THE
READY INDICATOR LIGHTS GREEN AGAIN.
OTHERWISE IT WILL RESULT IN SHORTENING OF
THE LAMP LIFE.
DO NOT OPERATE THE PROJECTOR CONTINUOUSLY WITHOUT REST. CONTINUOUS USE MAY RESULT IN SHORTENING THE LAMP LIFE. TURN OFF THE PROJECTOR AND LET STAND FOR ABOUT AN HOUR IN EVERY 24 HOURS.
✔Note:
•When the On start function is set to “On,” the projector will be turned on automatically by connecting the AC power cord to an AC outlet (p.53).
•The running speed of cooling fans is changed according to the temperature inside the projector.
•Do not put the projector in a case before the projector is cooled enough.
•If the WARNING TEMP. indicator blinks red, see “Warning Indicators” on page 65.
•The projector cannot be turned on during the cooling period with the READY indicator turned off. You can turn it on again after the READY indicator becomes green again.
“Power off?” disappears after 4 seconds.
24
