Picture Image

COLOR SELECTION MODE (continued)

COLOR M..

Return to the COLOR MANAGEMENT POINTER. (If you press the MENU button on the side control or the remote control, it returns to the COLOR MANAGEMENT POINTER and you will need to reselect and readjust the color.)

MENU

 

Return to the IMAGE ADJUST Menu. Any settings that

 

have been changed will not be stored. To store the

 

changed settings, be sure to select “LIST” and go to the

 

COLOR MANAGEMENT LIST.

4

In the COLOR MANAGEMENT LIST, the adjusted color

data are checkmarked. You can decide whether or not to

apply the adjusted color data in the list to the projected image (see below).

LIST MODE

Clear the check mark if you do not want to apply the adjusted color data; select the check mark and then press the SELECT button. The check mark disappears.

COLOR PALETTE

Return to the COLOR SELECTION mode so that you can readjust the setting for the color in that line. (This option is not available if the check mark is cleared.)

DEL

Select the DEL box if you want to delete the adjusted data. Press the SELECT button and a confirmation box appears and then select [Yes].

ALL DEL

Delete all the data in the list. Press the SELECT button and a confirmation box appears and then select [Yes].

MENU

The same function as stated above.

COLOR M..

The same function as stated above.

Auto picture control

Use the Point 7 8 buttons to select the desired Auto picture control position (Off, L1 or L2).

Off . . . . Auto picture control OFF position.

L1 . . . . . Auto picture control LEVEL 1 position.

L2 . . . . . Auto picture control LEVEL 2 position.

Color temp..

Use the Point 7 8 buttons to select the desired Color temp. level (XLow, Low, Mid, or High).

COLOR SELECTION MODE

Level and phase

Gamma

adjustment palette.

adjustment palette.

LIST

 

COLOR M..

 

MENU

LIST MODE

COLOR PALETTE

DEL

ALL DEL

 

MENU

 

COLOR M..

46

Page 46
Image 46
Sanyo PLC-XF71 owner manual All Del, List Color M Menu, Color Palette DEL ALL DEL Menu Color M