Setting
Enter a PIN code
Use the Point ed buttons on the side control or on the remote control to enter a number. Press the Point 8 button to fix the number and move the red frame pointer to the next box. The number changes to “✳.” Repeat this step to complete entering a four- digit number. After entering the
If you fixed an incorrect number, use the Point 7 button to move the pointer to the number you want to correct, and then enter the correct number.
If you entered an incorrect PIN code, “PIN code” and the number (✳✳✳✳) will turn red for a moment. Enter the correct PIN code all over again.
Change the PIN Code Lock setting
Use the Point 7 8 button to select Off, On1, or On2 and then move the pointer to “Quit” with the Point d button. Press the SELECT button to close the dialog box.
Change the PIN Code
The PIN code can be changed to your desired
caution:
when you have changed THE PIn code, write down A new pin code in column of the pin code no.. memo on page 80, and keep it securely.. If you forget your pin code,the projector can no longer be started..
Projector ID
This feature allows users to set serial communication configuration (Projector ID) when several projectors are connected via the
Use the Point 7 8 buttons to adjust the Projector ID.
●Projector ID ... 1 - 999. (Factory default setting : Projector ID 1)
Enter a PIN code
After a correct Logo PIN code is entered, the following dialog box appears.
Change the PIN code lock setting
Use the Point 7 8 buttons to switch between the options.
Change the PIN code
54
