Video Input

Input Source Selection (INPUT 2 Terminal / Component, RGB Scart)

Direct Operation

INPUT button

Choose Input 2 by pressing the INPUT button on the top control or on the remote control. Before using these buttons, correct input source should be selected through menu operation as described below.

INPUT button

Input 2

 

 

Input 1

 

 

Top Control

Remote Control

 

 

LAMP

 

MENU

SCREEN

MENU

INPUT

SELECT

 

 

SELECT

 

 

 

INPUT

 

 

 

IMAGE ADJ.

Menu Operation

1

Select the Input Menu with the Point Up/Down button, and then

 

press the Point Right button to enter the sub-menu.

2

Select Input 2 with the Point Up/Down button and then press

 

the Point Right button. The Source Select Menu will appear.

3

Move the pointer to the source that you want to select and then

 

press the SELECT button.

INPUT button

Input Menu

Component

RGB (Scart)

When the input source is coming from video equipment connected to the D-sub RGB terminal with a Component cable and a Component-VGA cable, select Component.

When the input source is coming from video equipment connected to the D-sub RGB terminal with a Scart-VGA cable, select RGB (Scart).

Input Video

Note:

Source Selection Menu

• Component cable and Scart-VGA cable are options. See page 58 for order.

pointer

Closes the source selection menu.

25