Safety Instructions

Air Circulation

Openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from overheating, and these openings must not be blocked or cov- ered.

CAUTION

Hot air is exhausted from the exhaust vent. When using or installing the projector, the following precautions should be taken.

Do not put any flammable objects near the vent.

Keep the exhaust vent at least 3.0’(1m) away from any objects.

Do not touch a peripheral part of the exhaust vent, espe- cially screws and metallic part. This area will become hot while the projector is being used.

Do not put anything on the cabinet. The materials put on the cabinet will not only get damaged but also cause fire haz- ard by heat.

Cooling fans are provided to cool down the projector. This projector monitors internal temperature and control the run- ning speed of the cooling fans.

Exhaust Vent

(Hot air exhaust)

Air Intake Vent

Installing the Projector in Proper Position

Install the projector properly. Improper Installation may reduce the lamp lifetime and cause a fire hazard.

20˚

Do not tilt the projector more than 20

 

degrees to either side.

20˚

 

 

Do not point the projector down to project

 

an image.

NO DOWNWARD

Do not put the projector on either side to project an image.

NO SIDEWARD

Moving the Projector

When moving the projector, close the front cover and retract the adjustable feet to prevent damage to the lens and cabinet. When the projector is not in use for an extended period, put it into a suitable case.

CAUTION IN CARRYING OR TRANSPORTING THE PROJECTOR

Do not drop or bump a projector, otherwise damages or mal- functions may result.

When carrying a projector, use a suitable carrying case.

Do not transport a projector by using a courier or transport service in an unsuitable transport case. This may cause dam- age to a projector. To transport a projector through a courier or transport service, consult your dealer for best way.

6