Computer Input

Computer Adjustment (Auto)

The Auto PC Adjustment function is provided to automatically adjust Fine sync, Total dots, Horizontal, and Vertical to conform to your computer. This function can be operated as follows.

Menu Operation

1

2

Select the PC Adjust Menu with the Point Up/Down button, and PC Adjust Menu then press the Point Right button to enter the sub-menu.

Choose the AUTO PC Adj. item and then press the SELECT but- ton.

Auto PC Adj.

Automatically adjusts Fine sync, Total dots, Horizontal, and Vertical for the input signal from your computer.

To store adjustment data

Adjustment parameters from Auto PC Adjustment can be memorized in this projector. Once parameters are memorized, the setting can be done just by selecting Mode in the PC System Menu (p33). See “Store” on page 36.

✔Note:

•The Auto PC Adjust cannot be operated when 480i, 575i, 480p, 575p is selected in the PC System Menu.

This arrow indicates that there are other items. Select this item and press the Point Down button to go to the next item.

34