
Computer Input
Display area
Select the resolution at the Display area dialog box.
Display area H
Adjusts the horizontal area displayed by this projector. Press the Point Left/Right button to decrease/increase value and then press the SELECT button.
Display area V
Adjusts the vertical area displayed by this projector. Press the Point Left/Right button to decrease/increase value and then press the SELECT button.
Reset
Resets all adjustment to their previous levels.
Mode free
To clear adjustment data previously set, select Mode free and press the Point Right button. A dialog box will appear and choose one of 5 modes and then press the SELECT button.
Store
To store adjustment data, select Store and press the Point Right but- ton. A dialog box will appear and choose one of 5 modes and then press the SELECT button.
Select Store to store adjustment data.
To clear adjustment data
closes this dialog box.
To store adjustment data
This Mode has parameters being stored.
Vacant Mode | shows values of “Total dots,” |
| |
| “Horizontal,” “Vertical,” |
| “Display area H,” and “Display |
| area V.” |
✔Note:
•Auto PC Adjust, Display area, Display area (H/V) cannot be selected when 480i, 575i, 480p, 575p is selected in the PC System Menu (p33).
36