8-2. Checking Motor Capacitor

Remove the lead wires from the capacitor terminals, and then place probes on the capacitor terminals as shown in Fig. 4. Observe the deflection of the pointer, setting the resistance measuring range of the multimeter to the maximum value.

The capacitor is “good” if the pointer bounces to a great extent and then gradually returns to its original position.

The range of deflection and deflection time differ according to the capacity of the capacitor.

8-3. Checking Fan Motor Winding

Referring to the electrical diagram, disconnect fan motor connectors, and measure the resistance between each lead wire with a multimeter.

The multimeter should be set in the X1 range. If the fan motor is hot, allow a few minutes until it gets cooled down.

When the resistances between each lead wire are those listed in "2-2. Major Component Specifications" the fan motor should be normal.

Multimeter

Compressor motor capacitor

Fan motor capacitor

Fig. 4

8-4. Checking Compressor Motor Winding

Checking compressor motor winding can be done in the

 

similar manner.

Multimeter

Remove the terminal cover of the compressor motor,

 

setting the resistance measuring range of the multimeter

 

to "X1Ω " and check the continuity between each pair out

 

of the 3 terminals as shown in Fig. 5.

 

Refer to "2-2. Major Component Specifications" for coil

Compressor motor

resistance.

coil terminal

 

Fig. 5

8-6. Checking Thermistor

(Only for heat pump model)

Unplug the 2P connector connected to PCB Ass´y and measure the resistance of the thermistor with a multimeter, which is set in the X1 kΩ range.

If the thermistor is normal, the multimeter should read approximately 15kΩ at 32˚F.

36

Page 40
Image 40
Sanyo STB0823H1, STB0810C1 Checking Motor Capacitor, Checking Fan Motor Winding, Checking Compressor Motor Winding

STB1020C1, STB1220C1, STB0811C1, STB1023C1, STB0810C1 specifications

The Sanyo STB0823H1 is a remarkable addition to the world of home appliances, particularly in the domain of efficient air conditioning solutions. Designed with precision and modern technology, this model offers both reliability and versatility, ensuring optimal performance across various environments.

One of the standout features of the STB0823H1 is its energy efficiency. Incorporating advanced inverter technology, this air conditioner dynamically adjusts its compressor speed to maintain the desired room temperature while consuming minimal energy. This not only contributes to lower electricity bills but also aligns with environmental sustainability goals, making it an ideal choice for eco-conscious consumers.

The STB0823H1 also boasts a user-friendly interface, making operation seamless for everyone. The sleek remote control allows users to customize settings with ease, offering various modes including cooling, heating, dehumidification, and fan-only options. The model includes a programmable timer, enabling users to set the unit to run according to their schedules, further enhancing convenience and energy savings.

In terms of airflow and coverage, the Sanyo STB0823H1 is equipped with a powerful fan that delivers a robust airflow rate, ensuring rapid cooling or heating throughout the room. Additionally, adjustable louvers allow for precise control over air direction, maximizing comfort no matter the room size or layout.

Noise levels are a crucial consideration for homeowners, and the STB0823H1 excels in this regard. Utilizing advanced sound-reducing technologies, this air conditioning unit operates quietly, ensuring a peaceful indoor environment even during peak operation.

Regarding maintenance, the Sanyo STB0823H1 features a removable and washable air filter designed to trap dust, allergens, and other airborne particles, promoting a healthier living space. This easy-to-maintain filter helps improve indoor air quality while also prolonging the lifespan of the unit, as clean filters contribute to efficient performance.

In summary, the Sanyo STB0823H1 emerges as a high-performing air conditioning solution known for its energy efficiency, user-friendly design, powerful cooling capabilities, quiet operation, and low maintenance. This model embodies the fusion of innovative technology and thoughtful design, making it a smart investment for homeowners looking to enhance their comfort while being mindful of energy consumption.