MOUNTING THE LENS

Compatible auto-iris lenses

1/3 inch Sanyo DC type lens

1/2 or 2/3 inch VIDEO type lens

 

 

VCL-CS8LY: Standard angle, f= 8 mm

Standard angle, f= 9 mm

VCL-CS4LY: Wide angle, f= 4 mm

Telephoto angle, f= 12 mm

 

 

VCL-CS2LY: Ultra-wide angle, f= 2.8 mm

More telephoto angle, f= 16 mm

 

 

If using a VIDEO type auto-iris lens

•Set the ALC and LEVEL controls on the lens to adjust the iris. Normally the ALC volume should be turned all the way to Av (Average).

•Depending on the type of lens used, the lens may not perform properly. In such a case, adjust the LEVEL volume on the lens casing to correct.

CONNECTIONS

(A)

1

2

(Video signal connections)

: VIDEO IN : VIDEO OUT

English 9

Basic connection for monitoring or recording

The peripheral devices (VCR, monitor, lens, etc.) and cables are sold separately.

1Make the video signal connection between the camera and the monitor or time lapse VCR.

2Insert the plug of this power cord into a wall outlet.

The POWER indicator (A) will light. Adjust the picture on the monitor using the Brightness and Contrast controls.

Coaxial cable type and maximum length

•Cable type RG-59U (3C-2V), 250 m maximum.

•Cable type RG-6U (5C-2V), 500 m maximum.

•Cable type RG-11U (7C-2V), 600 m maximum.

CAUTION:

•The RG-59U type cable should not be run through electrical conduits or through the air.

•Using CCTV/Video-grade coaxial cable.