ADJUSTMENTS

1. SYNC

1-1. V sync phase adjustment

When using a camera switcher to connect 2 cameras or more to one monitor, there may be a vertical roll of the images when switched. In such a case, set as described below.

1Set the SYNC switch (4) to L-L.

The on-screen setting will automatically switch to L-L. Press the CURSOR (j or l) button to select the on-screen L-Lsetting (get it flashing), then press the SET button. The adjustment sub-menu “ADJUSTMENT FOR L-L” will be displayed.

LLCURSOR

SET

MENU FOR ADJUSTMENT

 

SYNC

L-L

INT

IRIS

AI

BLC

ON

2Switch the display on the monitor from camera 1 to camera 2. Press the CURSOR (d or c) button until the vertical sync phase is obtained. The on-screen marker (b) will move and the adjustment value will flash according to the vertical sync phase setting.

CURSOR

Note:

When an adjustment is made, the PRESET setting will automatically switch to OFF. To return to the initial value, just return the PRESET setting to ON, then press the SET button.

3When finished.

1 Press the CURSOR (j or l) button to select END (get it flashing), then press the SET button to return to the normal camera display, or

2Press the CURSOR (j or l) button to select MENU (get it flashing), then press the SET button to return to the “MENU FOR ADJUSTMENT” display.

ADJUSTMENT FOR L-L

(V SYNC PHASE)

o------z------p524

ADJUSTMENT FOR L-L

(V SYNC PHASE)

o------

z----

--p 415

PRESET

 

 

OFF

 

 

END

 

 

MENU

12

English 15