SETTINGS

Automatic Gain Control (AGC) setting

The automatic gain control can be turned ON or OFF using the AGC ON/OFF switch (6) in the camera setup section.

ON: Auto gain control function on (setting used under normal conditions) (see page 23).

GAMMA: ON (0.45), OFF (1)

AGC GAIN: NORMAL (30 dB), HIGH (36 dB)

OFF: Fixed gain

Note:

When the AGC switch is set to OFF, the GAMMA and backlight compensation are automatically set to OFF, and the IRIS is set to AI.

White balance (WB) setting

Under normal conditions, the white balance is set to ATW (Auto Tracing White-Balance). However, depending on the camera installation location and conditions of use, the white balance mode can be set using the two WB switches (7 and 8) in the camera setup section (see table 1).

ATW: Initial setting. The initial value cannot be changed.

LOCK: The white balance is done automatically while the AWB LOCK button is pressed, then it is locked when the button is released.

PRESET: The white balance is done according to one of the three preset modes. The preset modes can be adjusted manually in the adjustment sub-menu (see page 21).

MODE 1: Setting for incandescent lighting (2660 ˚K).

MODE 2: Setting for indoors, fluorescent lighting (5100 ˚K).

MODE 3: Can be set for outdoors, sunlight (5100 ˚K).

MANUAL: Set to the initial value. The value can be changed manually in the adjustment sub-menu (see page 22).

ON

OFF

Table 1

ATW 7 8

AWB LOCK

LOCK 7 8

PRESET

7 8

MANUAL

7 8

English 11