ADDING A VOICE MEMO
In the still image shooting mode, you can record approximately 4 seconds of
sound (called a voice memo) when capturing the image.
1Display the Still Image Shooting
Setting Screen (see page 39).
2Select the add voice memo icon
a from the voice memo menu,
and press the SET button.
b: For no voice memo.
a: For adding a voice memo.
3Press the shutter release button to
capture the image, and then talk
into the microphone.
œAbout 4 seconds of sound are
recorded.
œDuring recording, K appears in
the upper right area of the LCD
monitor.
œAfter recording has finished, the add
voice memo setting reverts off.
HINT
œWhen the compression rate is set to L, it takes approximately 10
seconds for the image data to be recorded (when using a CompactFlash
card), after which voice memo recording will start.
œEach voice memo uses one-half the memory of an image captured at 4
resolution and G compression rate.
œThe voice memo can be played back in the still image playback mode (see
pages 85, 87).

B 23

VOICE MEMO

OFF
Shutter release button
Microphone
SX612/EX, GX, U (VPC-MZ3 GB2) Thu. Sept., 05/2002
English 104