COMBINING IMAGES (ADD PHOTO FUNCTION)
4Select the add photo icon o, and
press the SET button.
œCrosshairs (white lines) for setting
the size of the superimposed image
appear.
œIf the image was rotated, it will be
returned to its original orientation.
Determine the size of the superimposed image
At this time the size of the superimposed
photo (frame) is determined. The frame is
created by specifying its upper left corner
(start point) and lower right corner (end
point). The position of the frame is
determined after this.
5Press the arrow button to specify
the start point.
[j] and [l] buttons:
Move the horizontal crosshair up
and down.
[d] and [c] buttons:
Move the vertical crosshair left and
right.
œIf the arrow button is held down, the
crosshair moves in continuous
steps. Release the arrow button and
the crosshair stops moving.
START POINT SETTING
1st point 2nd point
1st point
SX612/EX, GX, U (VPC-MZ3 GB2) Thu. Sept., 05/2002
139 English