Sanyo VSP-9000 setting position, Setup (CONFIGURATION), 3Press the ent button, then press the ent button, bJoystick Setup (JOYSTICK)

Setup (CONFIGURATION)

•4–Matrix alarm: Matrix alarm detection

This setting sounds a buzzer when an alarm is detected.

Selections: YES, NO

•5–Power saving: Power save function

When no buttons are operated for approximately one minute, the screen brightness is automatically switched (dimmed).

When another button operation is performed, the brightness returns to normal.

Selections: YES, NO

3Press the ent button.

The selection item stops flashing, and the setup is complete.

2Press the button or button to switch the joysticksetting position.

Setting positions:

Set in sequence, from number 1.

Each joystick position will be placed in memory.

•1–Released (Setting center position)

Press the ent button without touching the joystick.

•2–All at right

(Setting far right position)

Press the ent button with the joystick tipped to the far right.

•3–All at left (Setting far left position) Press the ent button with the joystick

bJoystick Setup (JOYSTICK)1Press the button or button to select “JOYSTICK”,

then press the ent button.

The “3–JOYSTICK” screen is displayed.

C O N F I G U R A T I O N
3	- J O Y S T I C K
	> 1 - R e l e a s e d
	2 - A l l a t			r i g h t				esc
	4	- A l l	u p	l e f t
	3 - A l l a t
	5	- A l l	d o w n
	6 - R o t a t e			z o o m a t		l e f t
	7 - R o t a t e			z o o m a t		r i g h t
	M a x		C e n t .		M i n . D + D -
X : 0 0 6 2 0 0 0 5 0 0					0 0 4 0 0	0 0 7	0 0 7
Y : 0 0 6 2 0 0 0 5 0 0					0 0 4 0 0	0 0 7	0 0 7
Z : 0 0 6 2 0 0 0 5 0 0					0 0 4 0 0	0 0 7	0 0 7	ent
X : 0 0		7	Y : 0 0 7			Z : 0 0 7

tipped to the far left.

•4–All up (Setting topmost position)

Press the ent button with the joystick tipped to the topmost position.

•5–All down

(Setting bottommost position)

Press the ent button with the joystick tipped to the bottommost position.

•6–Rotate zoom at left (Setting left zoom position)

Press the ent button with the joystick rotated to the far left.

•7–Rotate zoom at right (Setting right zoom position)

Press the ent button with the joystick rotated to the far right.

When the wrong position was set by mistake, move the cursor to the mistaken setting and set it again.

English

System Setup 54