Sanyo VSP-9000 System Setup (Setup), 1Click the [Cameras] tab, double-clickit, and click the, BCameras (Camera communication setup)

System Setup (Setup)

BCameras (Camera communication setup)

1

2

1Click the [Cameras] tab.2Set camera lines using the various buttons.

: Clear button

Disconnects all cameras.

: Single row clear button

Clears a row at a time.

: A/B line switch button

When pressed, all camera connection terminals switch to A.

: Single row switch button

When pressed, a row of connection terminals switch to A.

: A/B line switch button

When pressed, all camera connection terminals switch to B.

: Single row switch button

When pressed, a row of connection terminals switch to B.

To change a camera address connected to another Dvr/Mux, change the Dvr/Mux address.

3Select a camera for communication settings,double-click it, and click the button to display a menu. Select the desired status.

Blank: Stop

A:Output from line A.

B:Output from line B.

The setting information is displayed in the “Camera info” line at the bottom of the screen. When the setting is blank, “Disabled” is displayed.

English

Software 64