Sanyo VSP-9000 bSpecial Code Chart, Appendix (Continued)

Appendix (Continued)

bSpecial Code Chart

These functions can be loaded by entering their special codes.

ERNITEC SATURN............................................	89
MARK MERCER ................................................	90
PELCO ..............................................................	92
SENSORMATIC .................................................	94

b ERNITEC SATURN

Code	Function
AUTOPAN
301	Saves the current position of the first limit switch.
302	Saves the current position of the second limit switch.
XXX	XXX= 0 – 255: Auto-pan speed (0=min, 255=max)
	Note: Cannot use with Saturn type.
PATROL
1000	Deletes patrol order.
1XXX	XXX= 1– 128: Writes preset position “XXX” into patrol order.
2000	Makes patrol order valid.
2XXX	X= 001 – 128: Deletes preset position “XXX” from patrol order.
3XXX	X= 000 – 255: Waiting time (in seconds) upon reaching specified position
	Example:
	“1000” Deletes previously defined order.
	“1001” Writes preset position “1” into order.
	“1005” Writes preset position “5” into order.
	“1006” Writes preset position “6” into order.
	“2005” Deletes preset position “5”.
OTHER FUNCTIONS
4XXY	Dome cameras can be set to automatically move to the "return position" after a
	set stopping time passes.
	XX= 01 – 99: “Return position” (Cannot select positions No. 100 to No. 128)
	Y= 0 – 9: Return time
	0: 10 seconds, 1: 20 seconds, 2: 30 seconds, 3: 40 seconds, 4: 1 minute,
	5: 2 minutes, 6: 5 minutes, 7: 10 minutes, 8: 20 minutes, 9: 40 minutes
4000	Invalidates movement to “return position”.
	Example:
	“4216”: After stopping for 5 minutes (Y=6), move to position 21 (XX=21).
400	Text display/non-display (switch)
500	Backlight compensation ON/OFF (switch)
9999	Initializes the dome camera internal memory.

English

89Others