SATO Label & Carbon Ribbon Specification, Accessories Checklist, DR300 Quick Guide, User Mode

DR300 Quick Guide			Pg 28
Label Size		Width 32 -80 mm	Pitch 19 – 181 mm
		(Label size is inclusive of label web)
Label Thickness		0.1 – 0.26 mm
Operation Panel		Key: LINE Key, FEED Key
		LCD: 8 digits x 2 lines (English character display, Black Lit)
		(only applicable to On-line use)
		STATUS: 2 – colour LED (Red, Green)
Adjustment VR		PRINT	: Print Darkness
		PITCH	: Print Pitch
		OFFSET	: Print Offset
User Mode		1. Print Darkness
		2. Print Position Adjustment
		3. Print Speed
		4. Offset Adjustment
Features		Graphics Print, Sequential Numbering, Line/Box, Print Position
		Adjustment, Back – Feed, Tear – Off, Calendar, Inverse Image, Zero
		Slash Selection, Non Standard Code Setting, Hex Dump,
		Customized Design Character (16 x 16, 24 x 24 dots)
Self		Head Element Broken, Paper End, Ribbon End, Head Open,
Check/Detection		Memory Card Error, Test Print
Option		Touch Screen Unit, Cutter Unit, Dispenser Unit, PC Card (JEIDA
		Type II), Scanner, cut Ticket/Tag Receiver, Full Qwerty Keyboard,
		Rewind Unit.
Label & Carbon Ribbon Specification
Label	Size	Min. W32 mm – Max W80 mm (incl. of label web)
		Min. P19 mm – Max W181 mm (incl. of label web)
	Thickness	0.1 mm – 0.26 mm
	Type	Rolled Paper
	Diameter	Max. outer diameter : 250 mm
Carbon	Type	Wax, Wax/Resin
Ribbon	Length	300m/roll
	Width	Max. 84 mm
	Winding	Face-in type

DR300 Quick Guide Pg 5

Accessories Checklist

When the box is opened, confirm if the following accessories are included. If anything is found short, the sales outlet or the dealer from where you purchased.

Cleaning

Sheet