Faxing

18

2
B
Close the Document Feeder (ADF).
Note
When sending a bound original,
the received image may contain
some black areas. To reduce this
effect, hold down the original to
prevent its bound part from rising.
-
--

-Bound Original Page Order

When sending bound originals
(books, magazines, etc.), you can
choose to have either the left page or
right page sent first. Chapter 4,
"Book Fax" in the Advanced Features
manual
Note
The default setting is Send Right
Page first. Chapter 8, "Changing
the User Parameters" in the Ad-
vanced Features manual
Setting Originals in the Document Feeder (ADF)
Use the Document Feeder (ADF) to
scan in a stack of originals in one op-
eration. The Document Feeder (ADF)
can handle both single-sided and
double-sided originals.
Limitation
The maximum document length is
1200mm (47").
Place all the originals to be sent in
a single stack.
You cannot set originals in the
Document Feeder (ADF) one page
at a time or in sheaves.
Do not open the Document Feeder
(ADF) while it is scanning the orig-
inals or a document could become
jammed.
Note
If you send documents longer than
420mm (17"), select Long Docu-
ment mode with the User Parame-
ters. If a jam occurs, the document
might be damaged because scan-
ning will not stop. P.20 Setting
a Scan Area Chapter 8, " Chang-
ing the User Parameter " in the Ad-
vanced Features manual
Documents longer than 420mm
(17") must be sent by memory
transmission (immediate transmis-
son is not possible).
If an original jams, press the {Clear/
Stop} key then remove the original
carefully.
If your original is bent or folded,
flatten it before you set it.
Set thin originals on the exposure
glass.
AdonisC2_EN_b-f_FM.book Page 18 Tuesday, J anuary 23, 2001 4:45 PM