Solving Problems

77
4
Solving Problems

This table lists some common problems and their solutions.

Problem Solution Refer to
Image background appears
dirty when received at the
other end.
Adjust the scan density. ⇒ P.38 “Image Density (Con-
trast)”
Printed or sent image contains
spots.
The Document Feeder (ADF)
or exposure glass is dirty.
Clean them. ⇒ the Copy Ref-
erence manual
Make sure that ink or correc-
tion fluid is dry before setting
the original.
---
Received image is too light. Request the sender to increase
the image density.
---
When using moist, rough or
processed paper, the printed
image may be partly invisible.
Only use recommended pa-
per.
⇒ Appendix, "Acceptable
Types of Originals" in the Ad-
vanced Features manual
When D appears on the dis-
play, toner is beginning to run
out. Replace the toner car-
tridge soon. ⇒ the Copy Ref-
erence manual
---
Message appears blank at the
other end.
The original was set upside
down. Set it properly.
⇒ P.16 “Setting Originals”
You want to c ancel a M emory
Transmission.
If the original is being pro-
gramed, press the {Clear/Stop}
key.
⇒ P.29 “Canceling a Memory
Transmission”
If the original is being sent,
use "Change/ Stop TX File".
⇒ Chapter 2, "Checking and
Canceling Transmission Files"
in the Advanced Features
manual
You want to cancel an Imme-
diate Transmission.
Press the {Clear/Stop} key. ⇒ P.29 “Canceling a Memory
Transmission”
You cannot add any destina-
tions in a Group at though the
number of destinations has
not reached the maximum.
100 destinations have been
programmed with the num-
ber keys (1000 with the op-
tional Expansion Memory).
Program more numbers with
Quick Dials or Speed Dials.
⇒ P.41 “Dialing”
AdonisC2_EN_b-f_FM.book Page 77 Tuesday, J anuary 23, 2001 4:45 PM