Dialing
41
2
Dialing
There are two main ways to dial a
number:
Number keys:
Enter numbers directly using the
key pad on the right side of the op-
eration panel.
Quick Dials:
When you have programed a des-
tination's number in a Quick Dial
key, you can dial the number by
just pressing that key. Additional-
ly, you can store a name that will
appear on the display whenever
you press that Quick Dial.
This section covers these features and
others in more detail.

Number Keys

Enter numbers directly using the key
pad on the right side of the operation
panel.
Note
Maximum length of a fax number:
254 digits.
You can insert pauses and tones in
a fax number. P.42 Pause, P.43
Tone
If the optional ISDN Unit is in-
stalled, you may need to enter a
sub-address. Chapter 4, "Sub-
address" in the Advanced Features
manual
AEnter the fax number with the
number keys.
The digits appear on the display as
you enter them.
Note
If you make a mistake, press the
{Clear/Stop} key to erase the in-
correct digits and try again.
If the optional ISDN Unit is in-
stalled, select G3 or G4 before
you go to the next step.
Chapter 4, "Changing the Line
Type" in the Advanced Features
manual
AdonisC2_EN_b-f_FM.book Page 41 Tuesday, J anuary 23, 2001 4:45 PM