Dialing
45
2

Groups

If you frequently send the same mes-
sage to more than one place, program
these numbers into a Group. Then
you can send the messages to all the
destinations in that Group with just a
few keystrokes. You can also pro-
gram a name for the Group (for exam-
ple, "Branch Offices") which will be
displayed before you press the {Start}
key.
Preparation
You need to program the Groups.
P.62 Programing Groups
Limitation
Group Dial can be used only for
Memory Transmission; it cannot
be used for Immediate Transmis-
sion. The machine automatically
changes to Memory Transmission
when you use Group Dial.
Note
To check the contents of the
Groups, print the list. Chapter 7,
"Group Dial List" in the Advanced
Features manual
A total of 500 destinations pro-
gramed for Group Dial.
ASet your original and select any
scan settings you require.
BPress [Group].
CPress the group key for the de-
sired group.
A programmed destination and
the total number of destinations is
displayed. Press [U
UU
U Prev.] or [T
TT
T
Next] to see the other destination.
Note
If you make a mistake, press the
{Clear/Stop} key and start again.
AdonisC2_EN_b-f_FM.book Page 45 Tuesday, J anuary 23, 2001 4:45 PM