95
Copying
Image Creation
Slanted Image—Slanting the Copy Image
This function slants the copy image at a selected angle.
Note
❐The slant direction is decided as shown in the illustration.
❐You can select the angle from –45° to +45°.
❐Depending on the angle, some parts of the image may be lost.
1Press the [Image Creation] key.
2Press the [Slanted Image] key.
3Adjust the angle by pressing the arrow keys.
Note
❐By pressing the [ ] or [ ] key, the number of the
angle can be adjusted by in steps of 5°.
❐By pressing the [ ] or [] key, the number of the
angle can be adjusted by in steps of 1°.
❐To cancel the angle, press the [Clear] key.
4Press the [OK] key.
5Set your originals, then press the Start key.