35
Basics
1Select the copy paper size.
2Press the [Custom Size Orig.] key.
3Make sure that the [Orig. Horiz.] key is selected.
Enter the horizontal size with the Number keys,
then press the [#] key.
Note
To change the value entered, press the [Clear] key
and enter a new value.
4Press the [Orig. Vert.] key and enter the verti-
cal size with the Number keys, then press the
[#] key.
5Press the [OK] key.
6Set your original on the exposure glass (platen
glass), then press the Start key.

Setting Non-standard Sized Originals

When copying from non-standard sized originals, enter the original size so that copy is well aligned.
Limitation
You must set your non-standard size originals on the exposure glass (platen glass).
Reference
For the standard sizes the machine can detect, see page 30.
Note
The dimensions you can enter must be within the following ranges:
Setting Non-standard Sized Originals
Vertical size
Horizontal size
50 - 297mm (in 1mm steps), 2.0" - 11.7" (in 0.1" steps)
50 - 432mm (in 1mm steps), 2.0" - 17" (in 0.1" steps)
[Custom Size Orig.] key