Copying
57
Basic Operation
Program—Storing and Recalling Your Copy Settings in Memory
You can store up to five frequently used copy job settings in machine memory and recall them for future use.
Note
If you want to change the stored programs, store another program again.
Storing Your Settings
1Set the copy settings you want to put into
memory.
2Press the Program key.
3Press the [Program] key.
4Select the program number you want to store
the settings in.
Note
If this program number is already being used, the
machine asks whether you wish to overwrite it or not.
Press the [Yes] or [No] key.
Recalling Your Settings
1Press the Program key.
2Press the [Recall] key.