33
Basics

Setting one Original at a Time in the Document Feeder

If you set one original at a time in the document feeder, the second and subsequent originals can be fed and
copied automatically without pressing the Start key.
Note
Do not press down or hold originals after inserting them.
While originals are fed from the original table to the exposure glass (platen glass), do not pull them out.
Do not lift the document feeder until the original has been completely fed out.
1Correct any curl, fold, or crease in the originals
before setting.
2Make sure the Insert Original indicator is lit and
the exposure glass (platen glass) is clear of origi-
nals.
3Adjust the guide to the original size.
4Set the original

face up

into the document feeder
until the Insert Original indicator goes off.
Note
If you are copying a stack of originals one sheet at a
time and you want to keep them in order, start with
the last page of the originals.
The original guide must touch the front side of the
original.
5Press the Start key.
6While the Auto Feed indicator is lit after an origi-
nal is fed, set the next original. The original is
automatically fed and copied.
Note
You can adjust the time the machine waits before
being ready for the next original with the user tools.
See page 191.
Setting one Original at a Time in the Document Feeder
TRSR050E