49
Copying
Basic Operation
Copying onto standard size paper with the bypass tray
Note
❐When you copy onto the reverse side of paper that has been already copied onto, ☛ see page 52.
1Open the bypass tray.
2Press the [Normal Paper], [Thick], [Extra
Thick], or [OHP] key.
Note
❐Make sure that the [Standard Size] key is selected.
❐When you copy onto OHP transparencies, you can select whether a blank slip sheet is inserted between OHP
tranparencies.
3Press the [OK] key.
4Adjust the paper guides to the paper size.
Note
❐Make sure that the paper guides matches to the pa-
per size. If the paper guides are not adjusted to the
paper size properly, paper might be skewed or a pa-
per misfeed might occur.
❐With large copy paper (more than A4l, 81/2" × 11"l),
swing out the extender.
5With the side you wish to copy onto face up, in-
sert the paper into the bypass tray until it stops.
Note
❐The paper size is displayed.
1:Horizontal size
2:Vertical size
3:Extender
4:Paper guides