42
Basic Operation
4Press the [OK] key.
5Set your originals, then press the Start key.
-Scanned color (Only for Edit type)
Note
❐When Single Color copying, Scanned colors might
come out lighter.
❐“Scanned color” means that the color is specified from
the original image directly.
1Press the [Single Color] key.
2Set your original, then press the [Scanned
Color] key.
Note
❐The image of the original is displayed.
3Press the color on the image you wish to scan
in with the editor pen.
Note
❐Point to an area of color with a radius of at least 5
mm.
❐To cancel the pointing, press the [Erase] key.
❐For details of this display, ☛ see page 142.
4Press the [OK] key.
Note
❐The color you have chosen is scanned in.
5Press the Start key.
R
RGCAREA5E
Exposure glass Display