119
Copying
Image Overlay
(Only for Edit Type)
Image overlay with opacity mode
1Set the foreground image original (original that
has the image to be composed) on the right of
the exposure glass. Then set the background
image original (original that will be the back-
ground image) on the left of the exposure glass.
2Press the [Image Overlay] key.
3Press the [Image] key in the Area Image Over-
lay.
4Select the [Overlay Opacity Yes] key.
5Mark diagonally opposite corners of the overlay
image area to be overlaid.
Note
❐If you want to clear the setting, press the [Erase]
key.
6Press the [Confirm Selection] key.
7Mark diagonally opposite corners of destination
area.
8Press the [Confirm Selection] key.
9If you want to edit the image, press the [Edit
Overlay Image] key.
Note
❐If you want to change the job settings, press the [Ba-
sic Settings] key. For details, ☛ see page 122.
0If you want to adjust the color/image adjustment,
press the [Color/Image] key.
Area Image Overlay (Only for Edit Type)