Connecting a Digital Audio Receiver with Optical SPDIF…

1.Make sure the power of X320 LCD HDTV and your receiver is turned off.

2.Obtain an optical SPDIF cable, connect it to your receiver’s optical SPDIF digital input and the optical SPDIF connection on the LINE OUT port on the back of the X320 LCD HDTV.

3.Turn on the X320 LCD HDTV and your receiver.

Please Note :

If you want pure digital stream for your receiver to decode, you must also configure the TV’s OSD Sound->Digital Audio Out function. Make sure the option is on 5.1CH.

If your receiver is making static noises when receiving 5.1CH, you must use the PCM option instead.

Please reference the receiver’s manual as well, to make sure the receiver is configured to receive signals correctly from the TV.

The TV’s SPDIF out for 5.1CH is ONLY used for antenna/cable connection. Any other incoming audio signal will be passed out of SPDIF in PCM format.

- 20 -

www.SCEPTRE.com

SCEPTRE X320 HDTV User Manual

Page 20
Image 20
Sceptre Technologies X320 user manual Connecting a Digital Audio Receiver with Optical SPDIF…