Ready to Watch Some TV?

Starting up the X320 LCD HDTV

1.Make sure your power cable is connected and the standby red light in the front of the TV is lit up.

2.Check all your connection cables off the side or the back of your TV and also your AV devices. Make sure they are all connected securely.

3.Turn on your TV and other AV devices if necessary.

4.Select the correct source according to the Connecting pages.

If You’ve Connected Antenna or Cable to the TV…

If an antenna or cable (without a cable box) is connected to your TV’s tuner, you will need to go through an INITIAL SETUP process in order to watch the TV. When you turn on the TV for the first time, the INITIAL SETUP screen will come up. Follow through the instructions to complete the setup and your TV will be ready for viewing.

1.Press ENTER to start the setup.

2.Use the ▲▼ buttons to select your language and press .

- 21 -

www.SCEPTRE.com

SCEPTRE X320 HDTV User Manual

Page 21
Image 21
Sceptre Technologies user manual Ready to Watch Some TV?, Starting up the X320 LCD Hdtv