Sceptre Technologies X320 user manual Safety Instructions

Models: X320

1 49
Download 49 pages 7.57 Kb
Page 4
Image 4

SAFETY INSTRUCTIONS

This product is designed and manufactured to operate within defined design limits, and misuse may result in electric shock or fire. To prevent the product from being damaged, the following rules should be observed for the installation, use and maintenance of the product. Read the following safety instructions before operating the display. Keep these instructions in a safe place for future reference.

To avoid the risk of electric shock or component damage, switch off the power before connecting other components to the X320 LCD TV.

Unplug the power cord before cleaning the X320 LCD TV. Please use the included custom bezel cleaning cloth for cleaning the bezel of the X320 LCD TV only. Do not use a liquid or a spray cleaner for cleaning the product. Do not use abrasive cleaners.

Always use the accessories recommended by the manufacturer to insure compatibility.

When moving the X320 LCD TV from an area of low temperature to an area of high temperature, condensation may form on the housing. Do not turn on the X320 LCD TV immediately after this to avoid causing fire, electric shock or component damage.

Do not place the X320 LCD TV on an unstable cart, stand, or table. If the X320 LCD TV falls, it can injure a person and cause serious damage to the appliance. Use only a cart or stand recommended by the manufacturer or sold with the X320 LCD TV.

Any heat source should maintain a distance of at least 5 feet away from the X320 LCD TV, i.e. radiator, heater, oven, amplifier etc. Do not install the product too close to anything that produces smoke or moisture. Operating the product close to smoke or moisture may cause fire or electric shock.

Slots and openings in the back and bottom of the cabinet are provided for ventilation. To ensure reliable operation of the X320 LCD TV and to protect it from overheating, be sure these openings are not blocked or covered. Do not place the X320 LCD TV in a bookcase or cabinet unless proper ventilation is provided.

Never push any object into the ventilation slots of the X320 LCD TV. Do not place any objects on the top of the Product. It could short circuit parts causing a fire or electric shock. Never spill liquids on the X320 LCD TV.

Do not use the X320 LCD TV in a portrait format (by rotating 90 degrees) under high temperature environment (25°C or higher), since this would retard heat dissipation and would eventually damage the TV.

The X320 LCD TV should be operated only from the type of power source indicated on the label. If you are not sure of the type of power supplied to your home, consult your dealer or local power company.

The power cable must be replaced when using different voltage from that specified in the User Manual. For more information, contact your dealer.

The X320 LCD TV is equipped with a three-pronged grounded plug, a plug with a third (grounding) pin. This plug will fit only into a grounded power outlet as a safety feature. If your outlet does not accommodate the three-wire

- 4 -

www.SCEPTRE.com

SCEPTRE X320 HDTV User Manual

Page 4
Image 4
Sceptre Technologies X320 user manual Safety Instructions