USING YOUR ENGINE STARTER

OVERVIEW

The 10000A has an engine start function that can be used to jump start your vehicle if the battery is low by providing 100 amps of current to assist engine cranking.

STARTING SEQUENCE

There are a few basic steps involved when using the engine start function.

1.Connect the charger battery clamps to the battery or charging system. Be sure to follow all of the precautions listed under “OPERATING INSTRUC- TIONS”.

2.Connect the charger power cord to a 120 VAC outlet. Again, be sure to follow all of the precautions listed under “OPERATING INSTRUC- TIONS”.

3.Press the CHARGE RATE button until the 100A START indicator is lit.

4.Crank the engine until it starts or 5 seconds passes.

5.If the engine did not start, wait for the charger to cool then repeat step 4.

During the starting sequence listed above, the charger is set to one of three states.

1.Wait for cranking - The charger waits until the engine is actually being cranked before delivering 100 amps for engine start. The charger delivers charge at a rate of 20 amps while waiting and will reset if the engine is not cranked within 5 minutes. (If the charger resets, it sets itself for a 2A charge and 12V REGULAR battery.) While waiting for cranking, the digital display shows the battery voltage (it can’t be set to percent).

2.Cranking - When cranking is detected, the charger will automati- cally deliver up to its maximum output (at least 100A) as required by the starting system for up to 5 seconds or until the engine cranking stops. The digital display shows a countdown of the remaining crank time in seconds. It starts at 5 and counts down to 0.

3.Cool Down - After cranking, the unit enters a mandatory 2-minute (120 second) cool down state. During this period, no settings can be changed. The buttons are ignored. The digital display indicates the remaining cool down time in seconds. It starts at 120 and counts down to 0. The 100A START LED blinks once every second. During the cool down period, the charger delivers charge at a rate of 20A and the CHARGING LED is lit. After 2 minutes, the 100A START LED will stop blinking and will light continuously, indicating that another crank cycle can be started. The digital LED will change from display- ing the countdown back to displaying the battery voltage.

ENGINE STARTING NOTES:

•If the battery is disconnected during the cool down period, the charger will reset.

11

Page 10 Page 12
Page 11
Image 11
Schumacher SCF-10000A owner manual Using Your Engine Starter, Starting Sequence, Engine Starting Notes
Page 10 Page 12

SCF-10000A specifications

The Schumacher SCF-10000A is a prominent jump starter and power bank that has gained immense popularity among automotive enthusiasts and everyday drivers alike. This device is specifically designed to provide a reliable and efficient solution for jump-starting vehicles and powering various electronic devices. With a robust set of features and advanced technologies, it stands out in a crowded market.

One of the main features of the SCF-10000A is its impressive jump-starting capability. This compact unit can deliver a peak current of up to 10,000 amps, making it suitable for starting a wide range of vehicles, including cars, trucks, motorcycles, and even boats. The device is equipped with heavy-duty jumper cables that ensure a secure connection and prevent any accidental sparks, enhancing user safety during operation.

In addition to its jump-starting abilities, the Schumacher SCF-10000A functions as a multi-purpose power bank. It comes with multiple USB ports, allowing users to charge smartphones, tablets, and other devices while on the go. This feature adds a layer of convenience, making it an ideal companion for road trips, outdoor adventures, or emergency situations.

Durability and reliability are essential characteristics of the SCF-10000A. The unit is housed in a rugged, impact-resistant casing that is designed to withstand harsh conditions, ensuring longevity. Additionally, the device features an integrated LED flashlight with multiple modes, including SOS and strobe, which can be a lifesaver during emergencies or low-light situations.

Technologically, the SCF-10000A incorporates smart charging technology that automatically detects the power requirements of connected devices. This ensures optimal charging efficiency and protects against overcharging, overheating, and short circuits. The built-in LCD screen provides real-time information on battery status, output voltage, and charging progress, giving users valuable insights into the device's performance.

The Schumacher SCF-10000A is also engineered with safety features, including reverse polarity protection, ensuring that incorrect jumper cable connections do not cause damage to the vehicle or the unit itself. With these considerations in mind, this powerful jump starter and power bank provide an unmatched combination of performance, convenience, and safety, making it an essential tool for any driver.
Top Page Image Contents