Seagate FR-A7AY Analog signal adjustment Pr , Pr , Pr , Pr, When Pr = 0 When Pr = 10

EXTENSION ANALOG OUTPUT

4.5.4Analog signal adjustment [Pr. 307, Pr. 308, Pr. 311, Pr. 312]

Use Pr. 307 or Pr. 311 to set for zero analog output (meter points 0).

In addition, use Pr. 308 or Pr. 312 to set for maximum analog output (full-scale).

Use Pr. 307 to set the value for zero analog output and Pr. 308 for maximum analog output when outputting the same signal from terminals AM0 and AM1.

Use Pr. 307(AM1) and Pr. 311(AM0) to set the value for zero analog output and Pr. 308(AM1) and Pr. 312(AM0) for maximum analog output when outputting different signals from terminals AM0 and AM1. (Refer to page 15.)

	When Pr. 309 = 0, 1		When Pr. 309 = 10, 11
Analog output	Output signal value (Pr. 308 or	Analog output	Analog output
Current Voltage
		Current Voltage	value (Pr. 308 or
	Pr. 312) for maximum analog output
(AM1) (AM0)		(AM1) (AM0)	Pr. 312) for

20mA 10V		20mA 10V	maximum
			output signal
0	Output signal	0	Output signal
	value		value
	Output signal value (Pr. 307 or		Output signal value (Pr. 307 or
	Pr. 311) for zero analog output		Pr. 311) for zero output signal

REMARKS		REMARKS	= Pr. 308, Pr. 311 = Pr. 312, the output
When Pr. 307	≥ Pr. 308, Pr. 311 ≥ Pr. 312, the output	When Pr. 307
values at terminals AM0 and AM1 are always zero.		values at terminals AM0 and AM1 are values set in
		parameters always.

4

19