EXTENSION ANALOG OUTPUT
4.5 Adjustment Procedure
4.5.1Setting of analog output signal voltage/current switchover (Pr. 309)
Use Pr. 309 Analog output signal voltage/current switchover to select whether to output the same signal or different signals from terminal AM0 (voltage output) and terminal AM1(current output).
Pr. 309 |
|
|
| Parameters for Setting | Parameters | |
Description | Terminal |
| for | |||
Setting |
| |||||
|
|
|
|
| Adjustment | |
0 | Same select signals are output | AM0 | Pr. 306 | : Select the output signal. |
| |
(initial | from the voltage output terminal | AM1 | Pr. 307 | : Output signal value for zero analog output | Pr. 323 | |
value) | (AM0) and current output | Pr. 308 | : Output signal value for maximum analog output | |||
terminal (AM1). The signal set in |
| Pr. 324 | ||||
10 | Pr. 306 Analog output signal | AM0 | Pr. 306 | : Select the output signal. | C1 (Pr. 901) | |
selection is made valid. (The | AM1 | Pr. 307 | : Analog output value for zero output signal |
| ||
| setting of Pr. 310 is made invalid.) | Pr. 308 | : Analog output value for maximum output signal |
| ||
|
|
| ||||
|
| AM0 | Pr. 310 | : Select the output signal. | Pr. 323 | |
|
| Pr. 311 | : Output signal value for zero analog output | |||
|
| C0 (Pr. 900) | ||||
1 |
|
| Pr. 312 | : Output signal value for maximum analog output | ||
Different select signals are | AM1 | Pr. 306 | : Select the output signal. | Pr. 324 | ||
| ||||||
| Pr. 307 | : Output signal value for zero analog output | ||||
| C1 (Pr. 901) | |||||
| output from voltage output |
| Pr. 308 | : Output signal value for maximum analog output | ||
| terminal (AM0) and current | AM0 | Pr. 310 | : Select the output signal. | Pr. 323 | |
| output terminal (AM1). | Pr. 311 | : Analog output value for zero output signal | |||
| C0 (Pr. 900) | |||||
11 |
|
| Pr. 312 | : Analog output value for maximum output signal | ||
| AM1 | Pr. 306 | : Select the output signal. | Pr. 324 | ||
|
| |||||
|
| Pr. 307 | : Analog output value for zero output signal | |||
|
| C1 (Pr. 901) | ||||
|
|
| Pr. 308 | : Analog output value for maximum output signal |
REMARKS
Analog output means voltage (0 to 10 V) and current (0 to 20mA) output from terminal AM0 and AM1, and output signal means the monitor signal (refer to page 18) set in Pr. 306 and Pr. 310.
4
15