5.0Performance characteristics
This section provides detailed information concerning
Note. Data provided is based on format at
5.1Internal drive characteristics
| ST400FX0002 | ST200FX0002 | ST100FX0002 | |
| ST400FX0012 |
|
|
|
Drive capacity | 400 | 200 | 100 | GB (formatted, rounded off value) |
Flash Memory Type | NAND SLC |
|
|
|
Emulated LBA Size | 512, 520, 524, 528, 4096, 4160, 4192, or 4224 |
| ||
Native Programmable Page Size | 4096 User Bytes |
|
|
|
Default Transfer Alignment Offset | 0 |
|
|
|
5.2Performance characteristics
See Section 11.4.1, "SAS physical interface" and the SAS Interface Manual (part number 100293071) for addi- tional timing details.
5.2.1Access time
Access measurements are taken with nominal power at 25°C ambient temperature. All times are measured using drive diagnostics. The specifications in the table below are defined as follows:
•
•Average access time is a true statistical random average of at least 5000 measurements of accesses between programmable pages on a randomly preconditioned drive.
Table 4: Typical Access Time (µsec)
|
|
| 400GB 1,2 | 100/200 GB1,2 | ||
|
| Read |
| Write | Read | Write |
|
|
|
|
|
|
|
Average |
| 268 |
| 133 | 208 | 121 |
| Typical 3 |
|
|
|
|
|
Page to Page | 268 |
| 133 | 207 | 121 | |
Average Latency |
| 247 |
|
| 188 |
|
|
|
|
|
|
|
|
1.Execution time measured from receipt of the Command to the Response.
2.Assumes no errors.
3.Typical access times are measured under nominal conditions of temperature, voltage, and horizontal orientation as measured on a representative sample of drives.
Note. These drives are designed to provide the highest possible performance under typical conditions. However, due to the nature of Flash memory technologies there are many factors that can result in values different than those stated in this specification
2.
Pulsar XT.2 SAS Product Manual, Rev. B | 11 |