7.5.4.1Shock
a.
The drive, as installed for normal operation, shall operate error free while subjected to intermittent shock not exceeding:
•1000 Gs at a maximum duration of 0.5ms (half sinewave)
Shock may be applied in the X, Y, or Z axis. Shock is not to be repeated more than once every 2 seconds.
Note. This specification does not cover connection issues that may result from testing at this level.
b.
The limits of
The drive subjected to nonrepetitive shock not exceeding the three values below, shall not exhibit device damage or performance degradation.
•1000 Gs at a maximum duration of 0.5ms (half sinewave) Shock may be applied in the X, Y, or Z axis.
c.Packaged
Seagate finished drive bulk packs are designed and tested to meet or exceed applicable ISTA and ASTM standards. Volume finished drives will be shipped from Seagate factories on pallets to minimize freight costs and ease material handling. Seagate finished drive bulk packs may be shipped individually. For less than full shipments, instructions are printed on the bulk pack carton for minimum drive quantities and proper drive placement.
Figure 9. Recommended mounting
Note. Image may not represent actual product, for reference only.
Pulsar XT.2 SAS Product Manual, Rev. B | 31 |
