Manuals / Seagate / Computer Equipment / Computer Drive

Seagate ST400FX0012, ST100FX0002 manual Physical/electrical specifications, Power specifications

Models: ST400FX0012 ST400FX0002 ST200FX0002 ST100FX0002

1 74

Download 74 pages 22.91 Kb

Page 30

Image 30

7.0Physical/electrical specifications

This section provides information relating to the physical and electrical characteristics of the drive.

7.1Power specifications

The drive receives DC power (+5V and +12V) through the standard SAS interface.

7.1.1Power consumption

Power requirements for the drives are listed in the tables beginning on page 23. Typical power measurements are based on an average of drives tested, under nominal conditions, using +5V and +12V input voltage at 60°C ambient temperature.

• Startup power

Startup power is measured from the time of power-on to the time that the drive reaches operating condition and can process media access commands.

• Peak operating mode

During peak operating mode, the drive is tested in various read and write access patterns to simulate the worst-case power consumption.

• Idle mode power

Idle mode power is measured with the drive powered up and ready for media access commands, with no media access commands having been received from the host.

7.2AC power requirements

None.

22	Pulsar XT.2 SAS Product Manual, Rev. B

Image 30

Seagate ST400FX0012, ST100FX0002 manual Physical/electrical specifications, Power specifications, AC power requirements

Contents

ST400FX0002ST400FX0012 ST200FX0002 ST100FX0002 Standard Models Self-Encrypting Drive Models Revision history Contents Installation Physical/electrical specificationsDefect and error management About self-encrypting drivesPage Pulsar XT.2 SAS Product Manual, Rev. B List of Figures Page Seagate Technology support services Seagate Online Support and Services Scope Electromagnetic compatibility Applicable standards and reference documentationStandards Electromagnetic susceptibility Australian C-Tick Electromagnetic complianceElectromagnetic compliance for the European Union Korean KCC Reference documents China Restriction of Hazardous Substances RoHS Directive Standard features General description Media description PerformanceReliability Factory-installed options Formatted capacitiesProgrammable drive capacity Thin Provisioning Drive Configuration Performance characteristics Performance characteristicsInternal drive characteristics Access time Format Mode Dcrt Bit IP Bit 400GB 200GB 100GB Performance Start/stop time Cache controlCaching write data Reliability specifications Error rates Endurance Management Data Retention Reliability and servicePreventive maintenance Lifetime Endurance Management Controlling S.M.A.R.T Maximum processing delay Fully-enabled delay4 S.M.A.R.T Performance impact Predictive failures Thermal monitor DST failure definition State of the drive prior to testingDrive Self Test DST Implementation Extended test Function Code 010b Short and extended testsShort test Function Code 001b Log page entries Product repair and return information Product warrantyShipping Storage Physical/electrical specifications Power specificationsAC power requirements DC power requirements 400GB standard model DC power requirements 200GB standard model DC power requirements 100GB standard model DC power requirements Conducted noise immunity General DC power requirement notesPower sequencing Current profiles Current profiles for 200GB models Power dissipation 400GB models in 6Gb operation200GB models in 6Gb operation Temperature a. Operating Environmental limits100GB models in 6Gb operation Relative humidity Effective altitude sea level a. OperatingShock and vibration Shock Recommended mounting Air cleanliness Vibration a. Operating-normalCorrosive environment Mechanical specifications Mounting configuration dimensions 400GB models Weight Pounds 100 grams About self-encrypting drives Controlled accessAdmin SP Data encryption Drive locking Default passwordRandom number generator RNG Data bands Supported commands Authenticated firmware downloadPower requirements Cryptographic erase Defect and error management Drive internal defects/errorsSSD Physical format address descriptor Bit Byte Background Media Scan Drive error recovery proceduresSAS system errors Auto-Reallocation Levels of PI Setting and determining the current Type LevelProtection Information PI Identifying a Protection Information drive Installation Drive orientation Cooling Air flow Drive mounting Grounding SAS features Interface requirements Dual port support Scsi commands supported Supported commands Persistent Reserve Read Capacity Write Mode Sense data Inquiry dataPage Mode Sense data for 400GB drives 14 1a 00 1a Mode Sense data for 200GB drives Mode Pages Mode Sense values for 100GB drives Miscellaneous status Miscellaneous operating features and conditionsMiscellaneous features SAS physical interface Datum B Section C C Section a a Electrical description Physical characteristicsConnector requirements Pin descriptions SAS transmitters and receivers Signal characteristicsPower Ready LED Out Differential signals SAS-2 Specification complianceLED drive signal General interface characteristics Index NumericsPage RNG See also cooling Page Seagate Technology LLC Americas