Seagate ST31270A manual Mounting the drive, Mounting holes

10 Medalist 1270 Installation Guide, July 1995

Mounting the drive

Required materials:

∙Four 6-32 UNC-2A screws (not included)

The drive fits in the standard 3.5-inch bay and can be mounted in any orientation. Secure the drive with four mounting screws not more than 6 full turns (0.20 inches) into the drive frame (see Figure 3). Position the drive so that the cables are not strained or crimped.

Caution. To prevent drive mounting-hole damage, use only the type of screws specified.

This completes the hardware installation.

Figure 3. Mounting holes