2 | Medalist 8421, 6421, 4311 and 2112, Rev. A |
| | |
What you need
•Straight-edge and Phillips screwdrivers
•Four 6-32 UNC drive mounting screws
•A standard 40-pin ATA interface cable, or
an 80-conductor cable if your system runs Ultra DMA mode 3 or 4 (max length: 18 inches)
•An unused drive power cable for your new drive
Before you begin
•Make sure your computer is turned off before you open the case.
•Read the handling precautions at the right and inspect the drive to make sure that it is not damaged.
•Save your foam-lined Seagate® disc drive box. This box has been approved by Seagate for shipping a Seagate disc drive. Using any other container or packing material voids your drive warranty.
